headlights - off
signal - on
turn signal bulb - on
sidemarker - on
headlights - on
signal - off
turn signal bulb - off
sidemarker - on
headlights - on
signal - on
turn signal bulb - on/off alternating
sidemarker - on/off alternating
the write up..
1) OEM wire harness that comes with the JDM kouki turnal signal lenses
2) Cut off the female connector off the harness.. we will reuse the female connector to connect to the vehicle's sidemarker male connector
3) Connect the
RED/BLACK wire from the female connector to the
RED wire from the sidemarker bulb.. DO NOT connect the
BLACK wire from the female connector, just tape it off as pictured
4) Connect the
BLACK wire from the sidemarker bulb to the
RED wire from the turn signal bulb
5) You can either splice the vehicle's turn signal connector as pictured or just cut off the connector completely
6) Connect the
RED and BLACK wire union from the turn signal bulb from step 4 to the
GREEN wire from the vehicle's turn signal connector.. Connect the
BLACK wire from the turn signal bulb to the
BLACK wire from the vehicle's turn signal connector
7) Tape off all your connections with electrical tape.. then plug the
female connector from the lenses to the
vehicle's sidemarker male connector.. now if you connect everything properly, your turn signals will work as the videos above