View Single Post
Old 02-12-2003, 11:27 AM   #3
drift freaq
R.I.P. Aya, always love
 
drift freaq's Avatar
 
Join Date: Nov 2001
Location: Los Feliz/Hollywood
Posts: 18,562
Trader Rating: (215)
drift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfectiondrift freaq is close to perfection
and to answer your question. The differences between the S13 VLSD and S14 VLSD are as follows . The back cover on the S14 is two bolt it is 4 bolt on the S13 . When you put a J30 VLSD or S14 VLSD into a S13 you put the S13 cover on. The only other difference is the eyelets for the front mount bolts on the S14 are wider and use a rubber donut with a steel plate on top and bottomif you get these items you can bolt the S14 VLSD into the S13 without a problem. As far as the ABS goes it is explained in the faq but I will spell it out for you. If you are installing a ABS VLSD into either car that did not have it there will be 1/2 inch difference in your driveshaft length due to the ABS sensor being on the front of the carrier. I.E. It makes the VLSD case a 1/2 inch longer.
__________________
"Having a lot of tracks on a song is like putting stickers on a car to get more horsepower"

New Video
https://www.youtube.com/watch?v=uebV1OnbRsw
Buy my mounts!
http://zilvia.net/f/sale-items/51531...ns-mounts.html
http://zilvia.net/f/tech-talk/317539...e-mouts-6.html
drift freaq is offline