Ichiba 5 Lug S13

[Fearell]

I'm looking into buying the Ichiba front and rear S13 conversion hubs. Now at the same time I would like to upgrade my front brakes to something like the 300zx calipers or something similar etc. If I buy these hubs I should have no problem buying the 300zx calipers, brackets and rotors correct? They should just bolt up with this hub? Same goes for the rears? Also has anybody ever used the Brembos from the 350z or say an STI?

Thanks

[godrifttoday]

Yea to everything u asked... U can use the search function to search for all the information ur heart desires

[killer240]

yea one easy search this will show up.
but about brembo rotors for 350z. it has to be the track edition.

[Fearell]

Sorry I just didn't see my one main question. My stock S13 caliper bracket will bolt right up to the 300ZX one? As in I just need to buy rotors and calipers + those hubs no custom brackets are needed.

[Wabash9000]

Originally Posted by Fearell

Sorry I just didn't see my one main question. My stock S13 caliper bracket will bolt right up to the 300ZX one? As in I just need to buy rotors and calipers + those hubs no custom brackets are needed.

The Definitive 300ZX Brake Swap!

z32 calipers will bolt up to the same location. With the z32 caliper you can use z32 rotors, or you can get 350z track edition rotors but will have to get a bracket to mount the 300zx caliper farther out(need at least 17" wheels)

also with the 350z track edition rotor you can use the matching 350z track edition Bembro calipers(cost >$1000 for them) by drilling the caliper mount hole up 2mm on the spindle(where the caliper mounts)

get the 300zx master cylinder or else your brakes will fell very spongy and you will have to press very far to get them to clamp fully.

[Wabash9000]

also you get get the bracket to use the 350z track rotors with rotors from Powered by max.
POWERED BY MAX: ???????????????Brake Rotor Upgrade

or you can get the bracket from other stores online