FULL 5 speed swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dousan_PG · 07-22-2004, 11:00 PM

pulling my motor this week and should have it ready by end of next week or mid next..at latest.
basically its for s13 speicifally (dueto that is what my car is)
looking at:

transmission (5 speed)
stock shifter (no shift knob)
stock clutch/pressure plate
stock flywheel
tranny harness crap
clutch line
clutch master cylinder
clutch slave cylinder
hardlines
5 speed drive shaft
ECU
brake pedal and such bracketry
clutch pedal and bracketry
s13 center console piece
also the tranny to motor plate..i dont know the name
no gauge cluster too..already gave to friend (it was HUD)
and ill pull whatever else is applicable to the 5 speed swap or if you can think of anything else you'll need let me know

my car was 92 240sx

um..anything else needed for a complete swap? let me know if im missing something

DETAILS READ HERE BEFORE REPLYING/PMING ME
I WILL NOT SHIP
I WILL NOT SHIP
I WILL NOT SHIP
pick up
OR nocal people can probably meet 1/2 way. my family lives near santa cruz so im sure something can be arranged.

pm me if you are interested
cost? im thinking 750ish
not sure what going rate is

i want to sell the FULL 5 speed swap so you dont need to sourch any parts besides fluids!
thanks!

Evo34wd · 07-23-2004, 12:53 AM

if u ever think of parting it
i'm interested in the clutch pedal clutch master/slave cylinder , hardlines and lower/upper shiftboot
if u r gonna sell it by parts
thanks

Dousan_PG · 07-23-2004, 07:38 AM

no i will not part it.

Evo34wd · 07-23-2004, 11:37 AM

i kno
i said if u ever think about it
i would be interested in those parts

Brian · 07-23-2004, 12:18 PM

he is not going to part it.

Heartwork · 07-23-2004, 01:26 PM

if u part it let me know

Evo34wd · 07-23-2004, 02:25 PM

i kno he is not going to part
i'm saying if no one ever gets the full 5 spd swap and if enough ppl are interested in other parts then parting would be the same

fresno240 · 07-23-2004, 02:53 PM

sounds like a good deal to me . . . pretty much everywhere in fresno its about 750-800

jy116 · 07-23-2004, 08:24 PM

Dont forget the driveshaft. Its different sumhow. You can use half of your AT driveshaft, and then get half of the of other MT driveshaft [nbot sure which half].

I only know this cuz thats how DriftFreaq sent it to me :/ But my hasty frend installed it all on his own so I didnt learn much...

driftingpanda · 07-23-2004, 08:55 PM

i will NOT part it out
EVER. EVER.
i will NOT part out..not one piece. ill go buy a AT shell and take the parts myself.

part out? mmm No.

dousan using driftingpanda's SN.

and dood i said on there 5 speed drive shaft. read it again.

yo fresno guy. if you wantit let me know. my good friend lives in visalia andi go up here and there. we can negotiate too of course, just no lowballers because takes time for me topull the crap off my car and i have full time job and non-free weekends.

*CleanS14* · 08-05-2004, 04:22 PM

Hey hit me up we should talk if you still have this stuff lying around.

-Jay

chlatboy · 08-05-2004, 06:20 PM

If you can make it for my 98 240 i mite be interested! But you would need a differnet driveshaft!

07-22-2004, 11:00 PM	#1
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 45 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	FULL 5 speed swap pulling my motor this week and should have it ready by end of next week or mid next..at latest. basically its for s13 speicifally (dueto that is what my car is) looking at: transmission (5 speed) stock shifter (no shift knob) stock clutch/pressure plate stock flywheel tranny harness crap clutch line clutch master cylinder clutch slave cylinder hardlines 5 speed drive shaft ECU brake pedal and such bracketry clutch pedal and bracketry s13 center console piece also the tranny to motor plate..i dont know the name no gauge cluster too..already gave to friend (it was HUD) and ill pull whatever else is applicable to the 5 speed swap or if you can think of anything else you'll need let me know my car was 92 240sx um..anything else needed for a complete swap? let me know if im missing something DETAILS READ HERE BEFORE REPLYING/PMING ME I WILL NOT SHIP I WILL NOT SHIP I WILL NOT SHIP pick up OR nocal people can probably meet 1/2 way. my family lives near santa cruz so im sure something can be arranged. pm me if you are interested cost? im thinking 750ish not sure what going rate is i want to sell the FULL 5 speed swap so you dont need to sourch any parts besides fluids! thanks! __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira Last edited by Dousan_PG; 07-22-2004 at 11:39 PM..

07-23-2004, 07:38 AM	#3
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 45 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	no i will not part it. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

07-23-2004, 12:18 PM	#5
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	he is not going to part it. __________________ http://bhworld.wordpress.com/

07-23-2004, 08:24 PM	#9
jy116 Zilvia Addict Join Date: Aug 2003 Location: Berkeley, CALifornia Posts: 785 Trader Rating: (0) Feedback Score: 0 reviews	Dont forget the driveshaft. Its different sumhow. You can use half of your AT driveshaft, and then get half of the of other MT driveshaft [nbot sure which half]. I only know this cuz thats how DriftFreaq sent it to me :/ But my hasty frend installed it all on his own so I didnt learn much... __________________ KYB AGX w/ dust boots $500obo... sadly serious

07-23-2004, 08:55 PM	#10
driftingpanda Zilvia Junkie Join Date: Apr 2002 Location: so cal Posts: 593 Trader Rating: (24) Feedback Score: 24 reviews	i will NOT part it out EVER. EVER. i will NOT part out..not one piece. ill go buy a AT shell and take the parts myself. part out? mmm No. dousan using driftingpanda's SN. and dood i said on there 5 speed drive shaft. read it again. yo fresno guy. if you wantit let me know. my good friend lives in visalia andi go up here and there. we can negotiate too of course, just no lowballers because takes time for me topull the crap off my car and i have full time job and non-free weekends. __________________ PM me about limited edition Pink GodziRa Sticker packages!

07-23-2004, 12:53 AM	#2
Evo34wd Leaky Injector Join Date: Jun 2003 Location: cali Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	if u ever think of parting it i'm interested in the clutch pedal clutch master/slave cylinder , hardlines and lower/upper shiftboot if u r gonna sell it by parts thanks

07-23-2004, 11:37 AM	#4
Evo34wd Leaky Injector Join Date: Jun 2003 Location: cali Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	i kno i said if u ever think about it i would be interested in those parts

07-23-2004, 01:26 PM	#6
Heartwork BANNED Join Date: Jan 2003 Location: Battle Ruins Posts: 1,183 Trader Rating: (0) Feedback Score: 0 reviews	if u part it let me know

07-23-2004, 02:25 PM	#7
Evo34wd Leaky Injector Join Date: Jun 2003 Location: cali Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	i kno he is not going to part i'm saying if no one ever gets the full 5 spd swap and if enough ppl are interested in other parts then parting would be the same

07-23-2004, 02:53 PM	#8
fresno240 Join Date: Jul 2004 Location: fresno ca Age: 41 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	sounds like a good deal to me . . . pretty much everywhere in fresno its about 750-800

08-05-2004, 04:22 PM	#11
CleanS14 it's NOT a show car!! Join Date: May 2003 Location: Bay Area, CA Posts: 1,967 Trader Rating: (7) Rides Gallery: CleanS14 Feedback Score: 7 reviews	Hey hit me up we should talk if you still have this stuff lying around. -Jay __________________ NAKAMA \| ROOTS RUN DEEP

08-05-2004, 06:20 PM	#12
chlatboy Zilvia FREAK! Join Date: Aug 2004 Location: Somewhere Posts: 1,252 Trader Rating: (0) Feedback Score: 0 reviews	If you can make it for my 98 240 i mite be interested! But you would need a differnet driveshaft!