Hello, i am trying to swap a 95 KA into an S13 and i need some help. We are using the S13 intake manifold, distributor, MAF, harness and ECU. We have done KA swaps before and no problems but never a S14 KA into an S13. We haven't changed the temp sensor but i'm pretty sure thats not the problem.
When we turn the key, the tach jumps around and when you go to start it, nothing happens. The starter is good, the battery is good, we have replaced some grounds but no luck. We are completely stuck. Three fuses click in the engine bay when you try to start it, the ACC on the driver's side and EGI and EGI PUMP on the passenger side. His S13 KA had the emissions removed before and we didn't change anything for the swap harness wise. Can you please help us?