Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

240sig · 06-08-2002, 08:13 PM

I have a 95' as well.  I ran my wire across the engine and found the grommit on the driver's side where all the engine wiring went through the fire wall.  cut a hole in it with a knife, and fished my power cable through there.  In order to be able to see where it is comming out of I then took off the panel that covers the fuses (not just the fuse cover, but the entire panel), and it was pretty easy to see where it all came out.  The grommit I am speaking of is pretty recessed, so it may take a little looking, and the work with it is mostly blind, only by feel.  Don't bother trying to get it through the passenger side grommit though, as there is no way to get through the fire wall over there without drilling (at least that is what I found)  

Hope that helps

06-08-2002, 08:13 PM	#3
240sig Join Date: Mar 2002 Posts: 17 Trader Rating: (0)	I have a 95' as well.  I ran my wire across the engine and found the grommit on the driver's side where all the engine wiring went through the fire wall.  cut a hole in it with a knife, and fished my power cable through there.  In order to be able to see where it is comming out of I then took off the panel that covers the fuses (not just the fuse cover, but the entire panel), and it was pretty easy to see where it all came out.  The grommit I am speaking of is pretty recessed, so it may take a little looking, and the work with it is mostly blind, only by feel.  Don't bother trying to get it through the passenger side grommit though, as there is no way to get through the fire wall over there without drilling (at least that is what I found)   Hope that helps __________________ Quote of the week:      "Your car's so sexy I would jump your bones if you had more than half a back seat." (yes it was actually said)