|
I recommend going with a 1.2mm Tomei or Apexi Headgasket with ARP studs, if you want to get into it. Be sure to use copper spray to ensure a good seal. Forget about the smaller injectors & go with 740's so you wont ever need to upgrade again, unless you're shooting for over 450rwhp. They will be fine, even on a completely stock SR, provided you have decent tuning capability. Also, if you tear into the motor, toss some cams in, so you won't have to do that later as well...trust me, a LOT of us thought 300hp would be enough, only to be pulling all the parts we used to get there & go bigger. Brian Crower cams & valvetrain seem to be the better bang for the buck currently, although I personally prefer Tomei. DEFINATELY get the 2871...the GT28 is pretty weak, although the spool is great!
__________________
Old School
|