|
INSTALL:
The N60 plug has 6 pins instead of 4 like the KA. Pins are,
A= Blank (not used)
B= Signal wire to KA signal (white)
C= Ground in engine bay
D= Ground to KA wire (black)
E= 12v wire to KA 12v (black/white stripe)
F= Blank (not used)
If you wire both grounds to the 1 KA ground wire it will NOT work properly. This is also the proper wiringl for a z32/j30 MAF because plugs are the same.
Thats all that I know of as far as wiring... hope this helps
|