[sil_8t]

No pics, but i did buy a used harness from JHOT on ebay and i installed it along with my new ecu from Enthalpy. Wired the MAF per the instructions that i followed the first time except now i have the same plug as him, so thats cool. I am using the old coilpack and lower harnesses, but now i am having electrical problems.

PROBLEM 1- Fuel pump was not coming on when i turned the key in the on position.

SOLUTION - Wired it to a switch, supposed to be temporary.

P 2 - No spark

Sol - jumped a wire on the relay, temporary

P3 - No fuel at injectors

NO solutions yet. all four have constant power and they ground when i go to start, but it loses power when i turn the key to start it. So, why is it losing power when i try to start?

What could be causing all of these problems? If i cannot figure this stuff out would it a good idea to consider a painless wiring kit

Thanks in advance


update: Tonight i went ot a friends house and awpped ECU's and his started with my ECU so thats not the porblem.