3 words: Factory Service Manual
Otherwise, you can use this excerpt from the excellent Steering Wheel Swap install directions(http://www.zilvia.net/installs/steeringw/steeringswap.asp)
-----
Dash removal:
This process is much easier that it sounds. Start by removing the climate control console, radio console and center console. Behind the radio, you'll find two extra screws in the dash. Remove them. Remove the glove box and then remove the 3 screws that hold down the metal frame. Remove the knee bolster under the steering wheel. Remove the metal plate (4 bolts) that is under the steering wheel. Once that is out of the way, remove the two large bolts that hold the steering column in place. Once the column drops, remove the instrument cluster bezel then the instrument cluster. Take a moment to remove the Airbag light. You'll thank yourself later. Once the cluster is out, remove the single screw that you see behind it.
Almost there! Next, use a blade screwdriver and carefully remove the thin windshield vent on the top of the dash. Once that's out, remove the two screws that you find there. On each side of the dash, there is a vent that feeds the doors. Remove the vents and remove the screw that you find behind each. On the passenger side, there is one more screw near the kick panel. Remove the door sills and the kick panels. At this point, the dash is free as a bird. Carefully lift and pull away.
-----
Enjoy the ride. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt='
'>