View Single Post
Old 08-27-2002, 06:37 PM   #2
Matt240SE
Zilvia Member
 
Join Date: Mar 2002
Location: Knoxville
Age: 40
Posts: 164
Trader Rating: (0)
Matt240SE is an unknown quantity at this point
Ok first off  you may not be able to see a whole lot with the panel off. Here is how is how i did it on my 97.

First pull down tyhe seat and unscrew the 4 bolts (2 on each side). - 10mm

And then the 2 big bolts that the rear seats is attached too , take those off. - 14mm ( I believe)

Then look in the top corners and there should be a little indented area where a plastic peice resides. You have to pop it off somehow, Mine broke off when trying to get if off im sure yours will too, but this is the only way i know of.

Fourthly, you have to pull on the side that is close to the door jam, it may not seem to budge but trust me it will these are heavy duty clips that are used on the door jam side.

That shoudl be it if you have trouble PM me or just write another post.
Matt240SE is offline   Reply With Quote