Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

MsSilvia · 04-17-2007, 06:27 PM

Fuel pump is new, replaced and back in tank. Would not come on in key on position. Tapped the wire harness (was checking relays which are good) and the pump came on. turned car off. Turned back on nothing until tapped wire harness then came on. Now it is completely dead. Does anyone have a pinout of the s13 blacktop ecu to map the wire. It is suppose to be black with a pink dot put it is not. PLEASE HELP!!!!!

04-17-2007, 06:27 PM	#1
MsSilvia Join Date: Jan 2006 Location: va Posts: 20 Trader Rating: (0)	fuel pump problem PLEASE HELP Fuel pump is new, replaced and back in tank. Would not come on in key on position. Tapped the wire harness (was checking relays which are good) and the pump came on. turned car off. Turned back on nothing until tapped wire harness then came on. Now it is completely dead. Does anyone have a pinout of the s13 blacktop ecu to map the wire. It is suppose to be black with a pink dot put it is not. PLEASE HELP!!!!!