Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

silverraven240 · 06-19-2007, 07:51 PM

ok here we go again.
so I just installed a tein flex coilover kit... I knew my alignment was off so I went to align but my front left tire is rubbing the shock. so people that I have to pull the hub and push away the shock. well that didn't work. my aliagnment machine won't work b/c the tire is at such and angle that the sensor is not making a clear signal to the others. I need to figure a way to get a better angle.

06-19-2007, 07:51 PM	#1
silverraven240 Join Date: Dec 2006 Location: Jacksonville Age: 40 Posts: 24 Trader Rating: (0)	lowering questions ok here we go again. so I just installed a tein flex coilover kit... I knew my alignment was off so I went to align but my front left tire is rubbing the shock. so people that I have to pull the hub and push away the shock. well that didn't work. my aliagnment machine won't work b/c the tire is at such and angle that the sensor is not making a clear signal to the others. I need to figure a way to get a better angle.