Quote:
Originally Posted by mello88
Not sure about the SR Hicas pump but if it's the same as the RB hicas pump... You take the ass end off the pump (4 10mm bolts iirc) and remove the little vanes from the rear (hicas) portion of the pump. Then you reassemble everything and block off the 2nd output. This disables the hicas section of the pump so it doesn't generate pressure, and of course the plug stops it from leaking ps fluid everywhere.
|
ive heard of that on the sr hicas pump by removing the ass end off...i cant just plug up the hole with the same size bolt or it will generate pressure right?....ive heard the dohc ps pump works with the dohc bracket off my ka24de...the only thing is one bolt wont fit