|
About the wiring harness... Look into the engine bay. All of the wires that you see are part of the wiring harness. Every wire that goes to the motor is a part of the engine wiring harness. All of the inputs (temp senders, O2 sensor, cam angle sensor, throttle position sensor, pressure senders, MAP sensor, etc.) and outputs (coil triggers, injector signals, VVT signal, etc) from the computer are interconnected thru this harness and the associated connectors and plugs. It is all of this that I am having to rebuild, since the original one was so hacked up. For little extra $, I got a universal harness for the Haltech computer, but I am having to adapt it to the DET motor. It's really quite simple, but I'm sorta treading new waters, so some of my questions have been hard to find answers for. Hope this helps. I may be doing the swap in a few days.
|