Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

*Jeff240sx* · 02-02-2003, 05:21 PM

You can get a JWT ecu, 50# injectors, fuel rail, and fuel pump to get you to 7psi. It will also get you to 15psi, on the stock KA bottom end. Look at d240t2. The KA isn't weak by any means. And the rods are extremely overbuilt for the engine, and can handle that. The weakest point are the pistons, and you can definatly get away with the setup above with forged pistons with ease.
-Jeff

02-02-2003, 05:21 PM	#32
Jeff240sx I hate you too... Join Date: Jul 2001 Location: Tampa, FL Age: 42 Posts: 5,828 Trader Rating: (0)	You can get a JWT ecu, 50# injectors, fuel rail, and fuel pump to get you to 7psi. It will also get you to 15psi, on the stock KA bottom end. Look at d240t2. The KA isn't weak by any means. And the rods are extremely overbuilt for the engine, and can handle that. The weakest point are the pistons, and you can definatly get away with the setup above with forged pistons with ease. -Jeff __________________ Whatup?