Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

A Spec Products · 06-02-2008, 04:18 PM

Are you sure?

If there is 5x114.3 stamped into the back of the wheel (and not the casting bolt pattern mark), I think its HIGHLY unlikely that Volk drilled the wrong bolt pattern for the wheels

Also, keep in mind that conversion bolt adapters aren't the best of methods, and also, it will change the offset of the wheels you have, because a conversion spacer will need to be at least 20mm to be safe (at least to me)

06-02-2008, 04:18 PM	#2
A Spec Products Post Whore! Join Date: Mar 2005 Location: Socal! Off 60/605 Posts: 7,256 Trader Rating: (27)	Are you sure? If there is 5x114.3 stamped into the back of the wheel (and not the casting bolt pattern mark), I think its HIGHLY unlikely that Volk drilled the wrong bolt pattern for the wheels Also, keep in mind that conversion bolt adapters aren't the best of methods, and also, it will change the offset of the wheels you have, because a conversion spacer will need to be at least 20mm to be safe (at least to me) __________________ A SPEC PRODUCTS CORP AME Wheels, Advan, ARC, Gram Lights, Nardi, Personal, Recaro, Works Bell, Work Wheels, Volk Racing, 5Zigen, & more! 626.618.1100 x 103 / aim: aspectuan Advertiser's Specials! Read / Give Feedback! Please Rate Us!