Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Tearlessj · 06-15-2008, 05:28 PM

Well I installed my SR, its cranks but wont spark. I get fuel but no spark. I just replaced the CAS cause the one I recieved was busted. Ok, so I ran the multimeter on the ECU side of the ignitor clip (on the wiring harness). I got 12v on all the pins constantly. Even when I was NOT cranking it. Plugged in the ignitor, cranked the motor, checked the pins on the 'out" side of the ignitor and nothing. Any ideas?

06-15-2008, 05:28 PM	#1
Tearlessj Nissanaholic! Join Date: Feb 2007 Location: Memphis Age: 33 Posts: 1,907 Trader Rating: (6)	Another, "My SR wont start thread" Well I installed my SR, its cranks but wont spark. I get fuel but no spark. I just replaced the CAS cause the one I recieved was busted. Ok, so I ran the multimeter on the ECU side of the ignitor clip (on the wiring harness). I got 12v on all the pins constantly. Even when I was NOT cranking it. Plugged in the ignitor, cranked the motor, checked the pins on the 'out" side of the ignitor and nothing. Any ideas? __________________ Nagasaki Motors Friends help you move. Real friends help you move bodies.