Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Dousan_PG · 03-18-2003, 10:33 AM

the upgrade is still near 400 dollars

2 calipers at 74 each=148 dollars + shipping
rotors 100 for both = 100 dollars + shipping
pads let's say KVR =45 dollars + shipping
brake fluid (we'll go big container) 20 bucks
Stainless steel lines..probably around 90 bucks

so its going to run approximately (and this might be over/under some)

403 dollars + shipping/taxes

so have about $450-500 max imho for anything else you might run into.

edit: dammit sykikchimp you beat me!!

ALSO if you want you can upgrade your brake master cylinder (MC) so thats another 70-140 bucks (oem or no oem is your choice). use a 1990 Z32 NA 1 1/16 brake mc (i think that's right)

03-18-2003, 10:33 AM	#39
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23)	the upgrade is still near 400 dollars 2 calipers at 74 each=148 dollars + shipping rotors 100 for both = 100 dollars + shipping pads let's say KVR =45 dollars + shipping brake fluid (we'll go big container) 20 bucks Stainless steel lines..probably around 90 bucks so its going to run approximately (and this might be over/under some) 403 dollars + shipping/taxes so have about $450-500 max imho for anything else you might run into. edit: dammit sykikchimp you beat me!! ALSO if you want you can upgrade your brake master cylinder (MC) so thats another 70-140 bucks (oem or no oem is your choice). use a 1990 Z32 NA 1 1/16 brake mc (i think that's right) __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira Last edited by Dousan_PG; 03-18-2003 at 10:36 AM..