Quote:
Originally Posted by Z U L8R
your window regulator's crap. cable's probably in a bind or fraying or jumped off the plastic pulley. take your door panel off, plug back in your window switch and lower your window so you can take the 4 10mm's off to disconnect the glass from the regulator. take out the two window stops at the front and rear of the door at the top (12mm bolts) take out your glass, undo your 3 10's to your window motor, undo your 4 12mm's that hold the regulator in. and take out the regulator. examine it or light it on fire. repair or replace with new regulator
gl
Dave
|
the cable looks fine, i had the glass out of the door, window motor assembly out of the door and checked it out. the cable is on the pulleys just fine. ill take a look again tomorrow thanks for the input.