|
ok so anyways i finally did it and it seemed like it worked.
about 6 months ago I cleaned the IACV with the carb cleaner trick, used a whole can and it helped.
Now, I did what you said to do and it didn't 100% fix the issue but the idle is definitely much more stable. especially when the A/C is on cause sometimes he A/C would idle at 1000 rpm roughly then dip to 600 rpm for 5 or so seconds and then go back up to where it was. Haven't had an issue with that. I didn't use solder so that may explain why the problem isn't 100% gone.
Also, when I was removing the wires and splicing new grounds in i noticed that the old grounds had some corrosion in it.
anyways, idle is pretty darn good now, thanks for the write up!
|