[Addicted2Kouki]

Kinda hard to say because not everyone is running the same exact kind.
I wouldnt mess with the toe yourself unless the alignment is really bad.

If you are gonna do it yourself... look up diy alignment.

Here's how i did it though...
Not the most accurate but held me over until I got an alignment.

1.Tie string to 2 jack stands and make sure they are the same height.
2.Set jack stands at a set distance away from the car.
3.Measure to make sure the distance is the same at 3 or more different fixed points of the car.
[front of door, rear of door, rear quarter, etc]
4.Take big flat piece of wood and put it flat against the front wheel.
5.Measure the distance from the front of the wheel to the string. Repeat with rear of the wheel.
6.Adjust accordingly.
7.Measure again and adjust until front number and rear number are the same.

Repeat on the other side.

Your wheels will now point in the same direction.
If you gave one side too much or not enough... the car will start to pull towards the side.