Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Att. Socal Drifter 2- INLAND DRIFT is BACK!!!

blessing · 10-24-2008, 09:10 AM

agame001 Quote:
Originally Posted by xplosiveg06

im pretty sure im gonna make it to this one. so for spectators its free? i have some friends that wanna see and possibly sign-up for an event in the future

yeah. they can watch for free from the parking lot above the track.

I dont know what adams track will do for the spectators, they might be change...??>

kidcrossover69 what requirements are needed for your car to be compatible to drift at this track?

** Helmets (any full face, open face as long as they're SA, MA or DOT rated)is required
** Seat Belts (your own choice, stock belts are good)
** Battery Tie Down ** Important
** Battery Terminal Covered (one or both terminal should be covered)
** Wiring Harnesses (must be all intact and covered, specially on hot temp areas)
** Wheels/Wheel Bearings and Tires (tires must have at least a minimum of 1/8'' of thread ( no wires showing) , all wheels should be intact using proper torque and lugnuts, not wobbly and not rubbing against the fenders or body parts)
** Brakes should be capable of stopping your vehicles constantly under a load of stress.
** No Oil Leak/Leak (power steering, engine, brakes, radiator, tranny, or lsd)
** No Fuel Leak (from gas tanks, fuel lines, fuel rails etc.).
** Need LSD or weld diff for you to be able to have fun

OneEightyDl2eamel2 is tandem allowed?

No, Sorry.

10-24-2008, 09:10 AM	#25
blessing Zilvia Member Join Date: May 2008 Location: Riverside, CA Posts: 170 Trader Rating: (5)	agame001 Quote: Originally Posted by xplosiveg06 im pretty sure im gonna make it to this one. so for spectators its free? i have some friends that wanna see and possibly sign-up for an event in the future yeah. they can watch for free from the parking lot above the track. I dont know what adams track will do for the spectators, they might be change...??> kidcrossover69 what requirements are needed for your car to be compatible to drift at this track? Helmets (any full face, open face as long as they're SA, MA or DOT rated)is required Seat Belts (your own choice, stock belts are good) Battery Tie Down Important Battery Terminal Covered (one or both terminal should be covered) Wiring Harnesses (must be all intact and covered, specially on hot temp areas) Wheels/Wheel Bearings and Tires (tires must have at least a minimum of 1/8'' of thread ( no wires showing) , all wheels should be intact using proper torque and lugnuts, not wobbly and not rubbing against the fenders or body parts) Brakes should be capable of stopping your vehicles constantly under a load of stress. No Oil Leak/Leak (power steering, engine, brakes, radiator, tranny, or lsd) No Fuel Leak (from gas tanks, fuel lines, fuel rails etc.). ** Need LSD or weld diff for you to be able to have fun OneEightyDl2eamel2 is tandem allowed? No, Sorry.