Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Chassis Wiring help

TurboSE · 11-06-2008, 11:58 PM

Hey guys and gals...I've started planning my chassis wiring for my 1992 S13 coupe. I will be wiring most of the circuits to toggle switches. So far, the only circuit I've found that I cannot (easily) wire on a toggle is the wipers/washer...which is ok, I can deal with multiple speeds. I have decided to go with a one-off (read: simplified) version of the factory wiring lay-out...what concerns me is the Time Control Unit. Below is the wiring diagram I made (copied from the FSM), since the only circuit controlled by the TCU I will be using is wipers/washer...will this set-up be sufficient to make them both work, or do I need to wire anything else into the TCU?

Any help or info is appreciated...Thanks in advance!

11-06-2008, 11:58 PM	#1
TurboSE Zilvia Addict Join Date: Sep 2005 Location: Hanover Pa Posts: 740 Trader Rating: (15)	Chassis Wiring help - wipers Hey guys and gals...I've started planning my chassis wiring for my 1992 S13 coupe. I will be wiring most of the circuits to toggle switches. So far, the only circuit I've found that I cannot (easily) wire on a toggle is the wipers/washer...which is ok, I can deal with multiple speeds. I have decided to go with a one-off (read: simplified) version of the factory wiring lay-out...what concerns me is the Time Control Unit. Below is the wiring diagram I made (copied from the FSM), since the only circuit controlled by the TCU I will be using is wipers/washer...will this set-up be sufficient to make them both work, or do I need to wire anything else into the TCU? Any help or info is appreciated...Thanks in advance! __________________ WTB: PAIR 18x10 0 to -25, less than $1500 shipped please.