nvm i figured it out. gee THANKS anyways guys GAWWWWWD!
there's a 3 pin plug to the solenoid, a 4 pin to the monitor screen and a 2 pin power and ground supply.
so i figured out the power and ground for the control head
tested and found the pins with continuity to the 3 pin boost solenoid, which left only 1 possibility there aka the signal wire
and also i got continuity to the 4 pin monitor plug which only left me with 2 choices left for that one.
i had continuity from the signal wire going to the 3 pin solenoid and the 4 pin monitor, so that left me with only 1 wire left, and voila
I ROX UR SOX
Dave @ Lethal Injection
HOTT SECKS