View Single Post
Old 01-25-2009, 08:57 PM   #9
Sileighty_85
Post Whore!
 
Sileighty_85's Avatar
 
Join Date: Dec 2006
Location: Misawa, Japan
Posts: 6,815
Trader Rating: (8)
Sileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfection
Quote:
Originally Posted by TheRealNighthog View Post
but you dont need it. 370's at 4 bar will support 290 hp or so. 550's at 4 bar will support about 375 hp. If you want to get technical the injectors to run on a 2871 are 72 lbers if you want to get into the optimal efficiency range.. I doubt this guy is going to ring every last bit of power out of either turbo, I would rather just get a turbo that is more capable for about the same price.

And also I am running 1000cc injectors and I am NOT running a stand alone. I didnt feel like spending 1200 bucks when I can spend 400 for something that is just as capable.
Im not sure about anyone elses 3700cc's but on my Old Stock Setup @ around 11psi mine leaned out on a T-28, Stock EUC, 370cc, Stock SR Fuel pump/FRP
No corners cut on my swap. But im sure with a Walbro and a Adj FPR you can squeeze a little bit more fuel out

__________________
後輪駆動車1番
1989 Built SR GT2871R -363whp
1998 S14 W/RB25- 250ish (For Now)
1986 SR86 - 200ish
1990 R32 GTR - 320hp
Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html
Don't Buy XS-Power or SSAC Shit
Sileighty_85 is offline   Reply With Quote