|
Hmm, not sure where a step by step is, even the FSM isnt super clear on it, but does help.
It’s pretty straight forward.
Do a search because my instructions are for a 91, but they should be similar, also there should be a good detailed explanation in the search somewhere.
1. Pull the fuse to the fuel pump, start car and let it die.
2. Find the In Feed and Return Feed Fuel Lines and pull them off the Guides. Also remove the small line near the firewall. Unplug all injectors.
3. Loosen a few 10 and 12mm bolts and a hard to find on that is close to the firewall below injector #4. Id suggest you get a swivel attachment for your ratchet.
5. Pull Fuel Rail.
This is a quick reply, so there might be some loose ends.
Getting it back on is the frustrating part. You have to sorta force it on there (it wont seat into the engine) then tighten everything from there.
|