Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

JT_Production · 03-30-2009, 09:57 PM

Thanks,

I was busy for a good part of today but I got some work done today on the dash. I'm new at the fiber glass / auto body work world so all this is new. I'm learning along the way what not to do.

I began to fill the air bubbles today with some bondo. I picked up the can of the red autobody bondo. I'd rate the production a high 4 1/2 - 5.5 I used a lot of the bondo when I first started to fill the bubbles. The second time around after picking up some professional bondo body filler from advance its the yellow can, it worked much better. The color of the gook is lime green!

Here are some photos, I have ALOT more work a head of me. I've got to sand the vents and fix them up so they look flush, I have some low spots where the middle AC vent is. I have some felt that lifted up near the bottom right corners. I've got the top nearly done the sides will be a booger to fix.

PICTURES!!

03-30-2009, 09:57 PM	#24
JT_Production Join Date: Mar 2009 Location: Florida Age: 37 Posts: 16 Trader Rating: (0)	Thanks, I was busy for a good part of today but I got some work done today on the dash. I'm new at the fiber glass / auto body work world so all this is new. I'm learning along the way what not to do. I began to fill the air bubbles today with some bondo. I picked up the can of the red autobody bondo. I'd rate the production a high 4 1/2 - 5.5 I used a lot of the bondo when I first started to fill the bubbles. The second time around after picking up some professional bondo body filler from advance its the yellow can, it worked much better. The color of the gook is lime green! Here are some photos, I have ALOT more work a head of me. I've got to sand the vents and fix them up so they look flush, I have some low spots where the middle AC vent is. I have some felt that lifted up near the bottom right corners. I've got the top nearly done the sides will be a booger to fix. PICTURES!!