View Single Post
Old 04-30-2009, 04:16 PM   #15
cuong_vo06
 
Join Date: Mar 2008
Location: Katy, TX
Posts: 24
Trader Rating: (0)
cuong_vo06 is an unknown quantity at this point
Quote:
Originally Posted by supreme_1 View Post
I did give you advice and i also told you to take it to a glass shop. Please correct the grammatical errors and improper use of terms so i can distinguish whether or not you are trying to argue with me or make a point that you are broke.

If by all means you do want to try and take the glass out for your self, go and pick up a heat gun, wire leader, a needle, and a screwdriver. Start by taking off the surrounding trims from the plastic clips (if it was already taken off previously it may be siliconed on.) Once that is done carefully take those clips off while trying not to break them. Once you have done that heat the portion of the adhesive where you are trying to puncture with the wire leader and a needle. Once that is done, slowly go around the window with the wire leader. Make sure you heat ahead of where you will be cutting. Go around the entire window, and in no time flat you should get it off.
Thanks for your advice and telling me my grammers are wrong. and financially i dont make that much money so if there is an opportunity to save money i would love to take it. Everyone works hard for their money so i thought people would understand if i want to save a bit of cash. Apparently you are well off and dont have to worry about it. since its not possible for me to do it ill get it done by a pro like you suggested. thank you.
cuong_vo06 is offline   Reply With Quote