|
mine is on also. i tried quickly to address it but havent given it much thought until i finish my q45 calliper upgrade.
but what i did notice is.... if i pull up the ebrake the brake light gets brighter, and put it down it gets dimmer but still on. if i unplug the sensor on the bmc the light goes out, and if i use the ebrake, it lights on and off normally. the float isnt stuck and i drained/flushed out the bmc and it was still on. when i do my brake work (Q45 calipers/pads/rotors and ss lines up front, rebuilt s13 calipers in the R w ss lines) i will be doing a full flush and then going from there to address the light.
if anyone knows what could be up with mine id appreciate some suggestions
|