Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Tranny will not go in gear when motor is on.

scribbles6 · 05-30-2009, 01:35 AM

^ that's also what i got in another forum about the pressure plate. i'll double check the fork, i'll just pop off the slave and see if i can move the fork around a lot or at all.

someone else was saying that i need to either bleed the dampener or just remove it and run the straight line to the slave. i'll try that too.

i hope my fork is in one piece.. :unsure: and if neither of those work, i'll try the pressure plate, i just really don't want to pop the tranny off lol such a pain in the ass.

thanks. keep it coming, i wanna get as many opinions as possible, i'm still a newb when it comes to a lot of troubleshooting.

05-30-2009, 01:35 AM	#4
scribbles6 Users Awaiting Email Confirmation Join Date: Jul 2006 Location: east bay! Age: 39 Posts: 211 Trader Rating: (5)	^ that's also what i got in another forum about the pressure plate. i'll double check the fork, i'll just pop off the slave and see if i can move the fork around a lot or at all. someone else was saying that i need to either bleed the dampener or just remove it and run the straight line to the slave. i'll try that too. i hope my fork is in one piece.. :unsure: and if neither of those work, i'll try the pressure plate, i just really don't want to pop the tranny off lol such a pain in the ass. thanks. keep it coming, i wanna get as many opinions as possible, i'm still a newb when it comes to a lot of troubleshooting.