|
Tranny noise only when cold....
Set up is...
Sr20det redtop
stock trans w/clutchmaster 6 puck stage 3 (new)
12light flywheel (resurfaced)
New TOB
New master cylinder and New slave cylinder
75w-90 synthetic trans fluid
Sorry the another question like this but i searched and searched but couldn't find something with my problems.
When i turn on the car in the morning and engage the clutch after a few seconds a whirling/grinding noise will start. It stops when i disengage the clutch. Gears go in smoothly even when the grinding is occuring. It will keep doing this until the car is warm. Once it's warm it will NOT happen again. Also 4th will grind EVERY now and then and 5th will grind 50% of the time ever so slightly during daily driving. I have adjusted the clutch pedal inwards and outwards. BLED AND BLED AND BLED!!! Changed master and slaves several times. Pedal has great feel and has been felt by other sr owners in my town and they all say it feels great. NO SLIPPING. Pulls great. Any ideas????
Please no flaming i am not in the mood. Already apoligized in advance.
Many thank you's to anyone that attempts to help.
__________________
|