|
update: so i checked for 12v at the relay in the fuse box. so heres what i found, 2,3,5 circuits have 12v power when switched on, but circuit 2 shows no power at any time. is this normal?
secondly i hot wired a wire directly from the battery to the fuel pump, and voila i get fuel through the priming circuit.
i was thinking about bypassing the whole fuel circuit and making my own wiring.
heres what its going to look like.
wiring looks like this.-------------------------------(Relay)
Battery(+)______(10A Fuse)___________/---------|-1--2-|-------to fuel pump pin 106 or 104 on your ecu <<<<signal circuit
(split)\---------|3o--o5|-------to fuel pump------ground to chassis <<<<<power circuit
|