Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - HELP! Wiringing SR20DET, car is done but wont start.

302INMY240 · 08-26-2003, 06:49 PM

you prolly have the wiring wrong,

check srswap.com, i have the s13 blacktop in a 93 fastback, i noticed i only have one brown wire for the 02 sensor, thats the problem im getting.

i used some of the details in the SCC article:

" there are only two tricky parts to these connectors. on the chassis portion of the of the brown connector, there are 2 brown wires, connect the outer one to the br wire on the engine portion of the connector. on the engine portion of the grey plug, both the black/red and blue/red wires need to be connected to the black/red wire on the chassis side of the connector"

i hope that helps, make sure your grey plug is hookep up like this

my car still isnt right, i runs good in the rpm range but low on power, i think i have a wire in the wrong spot for the 02 sensor

08-26-2003, 06:49 PM	#8
302INMY240 Join Date: Aug 2002 Location: buffalo NY Posts: 31 Trader Rating: (0)	you prolly have the wiring wrong, check srswap.com, i have the s13 blacktop in a 93 fastback, i noticed i only have one brown wire for the 02 sensor, thats the problem im getting. i used some of the details in the SCC article: " there are only two tricky parts to these connectors. on the chassis portion of the of the brown connector, there are 2 brown wires, connect the outer one to the br wire on the engine portion of the connector. on the engine portion of the grey plug, both the black/red and blue/red wires need to be connected to the black/red wire on the chassis side of the connector" i hope that helps, make sure your grey plug is hookep up like this my car still isnt right, i runs good in the rpm range but low on power, i think i have a wire in the wrong spot for the 02 sensor