Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Bad to have rotor not centered in the width of the wheel?

slider2828 · 02-02-2010, 03:32 PM

I would think, just my opinion, that there will be some added stress on the studs as the actualy the wheel is further away from the calipers.... so it really would depend on how far you are spacing the rim outwards.... In road race, usually no more than 10mm spaced outwards from the hubs in which this case the hub will be direct alignment of the rotors.... Also is it going to clear the calipers even though you space it?

I assume you will be spacing way more than 10mm? 15mm?

02-02-2010, 03:32 PM	#3
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 6,040 Trader Rating: (13)	I would think, just my opinion, that there will be some added stress on the studs as the actualy the wheel is further away from the calipers.... so it really would depend on how far you are spacing the rim outwards.... In road race, usually no more than 10mm spaced outwards from the hubs in which this case the hub will be direct alignment of the rotors.... Also is it going to clear the calipers even though you space it? I assume you will be spacing way more than 10mm? 15mm? __________________ Turn and Burn!