[Mr. Spool]

I had this problem on my 240 after installing a new clutch. what I had to do was rebleed the clutch line. Also on the ka trany there is a little box that the clutch line goes into. I am not sure what it does so I tried removing it to see if it would help... it did. all my problems were gone. after this I search for why the bypassing of a stock part would do this and found that it has a tendancy to trap air that can not be removed. By the way if it wont go into gear turn the car off and put it into gear and then turn it back on. you can also double clutch to get more pressure in the line. hope this helps.