View Single Post
Old 02-17-2010, 10:57 AM   #5
lv-180sx
Zilvia Junkie
 
lv-180sx's Avatar
 
Join Date: Jun 2004
Location: las vegas
Posts: 547
Trader Rating: (12)
lv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfectionlv-180sx is close to perfection
Quote:
Originally Posted by Car6on14 View Post
Hi, is the e brake 5/8 or 3/4 ? r ur front lines just to replace the stock lines? as they just go from master cyl to front? I have the Ksport bbk, guessing i can prolly only use the lines from master cyl to ebrake and ebrake to T? not sure, trying to figure out if ther compat, lemme kno if u have worked with them. Thx.
i have the 3/4" reservoir..

yes, the front lines replace everything, and i really doubt that its the same fittings as your BBK, however i left alot of slack in the lines so you could always cut the line and add another fitting at your local hose place. they're AN fittings with crimped ends.. the rear, you COULD just use the line from ebrake to rear t, and stock from there like you were saying, LMK
lv-180sx is offline   Reply With Quote