alright. today is friday. me and my buddy got the starter off, cleaned all the connections check the wires. all that. they should be good now. went and got the starter tested at autozone, it passed. and she still dosent start. theres the relay clicking on the firewall that im guessing is the window wiper motor. but im not sure, my dumb ass forgot my flash drive so i dont have the fsm with me again. however, there does seem to be a clicking like another relay over by the intake filter. almost sounds like its comeing from the charcoal can but unless im wrong that dosent have a relay or a switch in it does it? there also seems to be a relay clicking at the fuse block dave told me about by the bat. they do seem to be a little corroded so im going to go price them wereever(im assumeing autozone will have them) and replace the corroded ones. the fuses im talking about are the ones with the clear plastic cover on them. the blade fuses are all good. any guidence from here will help. kinda hopin dave is keepin an eye on this. he seems to know what hes doin.
EDIT: when i got the starter tested it said that the solinoid test was N/A. im assumeing it wasent tested. so my question is could it be the solinoid? i thought that the solinoid would click if the starter was bad. but to be honest i dont remember if it would click if its not working or not working right. ill be doing some more reserch and checking diagrams when i get home tonight and trying to figure this all out.
__________________
WTB: 1/24 scale chuki s13 model.
|