Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Maeda · 11-10-2003, 03:19 PM

The Bad News
Ok so in my attempt to de-yellow the zenki I clouded and perhaps even destroyed the plastic headlight cover thing...

The Good News
I have access to a plastic vaccuum molding machine so I MIGHT be able to make replacements...

The Ugly News
I don't think I can replicate the inside beam pattern portion of the lense (fluted lense?).

Could I just make clear lenses with no pattern? Am I high?

Could I just sand down and polish the crap out of the stock (fogged up) headlights?

Valuble lessons learned today: Goof Off + Headlight = NO HEADLIGHT

11-10-2003, 03:19 PM	#1
Maeda Nissanaholic! Join Date: Dec 2002 Location: Camp Snake Bite, CA RIP Posts: 2,356 Trader Rating: (0)	Zenki Headlight Repair Woes The Bad News Ok so in my attempt to de-yellow the zenki I clouded and perhaps even destroyed the plastic headlight cover thing... The Good News I have access to a plastic vaccuum molding machine so I MIGHT be able to make replacements... The Ugly News I don't think I can replicate the inside beam pattern portion of the lense (fluted lense?). Could I just make clear lenses with no pattern? Am I high? Could I just sand down and polish the crap out of the stock (fogged up) headlights? Valuble lessons learned today: Goof Off + Headlight = NO HEADLIGHT __________________ Last edited by Maeda; 11-10-2003 at 03:48 PM..