View Single Post
Old 11-14-2003, 10:13 AM   #9
blu808
Post Whore!
 
blu808's Avatar
 
Join Date: Dec 2002
Location: Campbell, Ca
Age: 42
Posts: 5,010
Trader Rating: (3)
blu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfectionblu808 is close to perfection
Send a message via AIM to blu808
I am cutting out the metal inside the car. From the doors back to the taillights. Basically the inner part of the sheetmetal, I also remover the rear seat supports that are welded from the fender to the strut tower to the floor.

You can purchase just about any size fuel cell you want, so capacity is up to you. You cannot use your stock fuel pump. Fuel cells have built in sumps. You can only use a in line pump.
From the cell use stainless braided line to a in line fuel pump then to the motor. Then use a stainless braided line to the cell from the motor for the return.

Cells arnt really expensive but the lines and pumps make them expensive.

Luke
__________________
blu808 is offline   Reply With Quote