Quote:
Originally Posted by JonathanPrem
I'm going to be buying set of rims and want your thought and opinions
18x9 -12 offset and 18x10 -12 or Should i go -25.
It will be on zenki with NO widebody but will have camber,stretched tires , pulled and rolled fenders. Would it Hit my coilovers?
|
Quote:
Originally Posted by irritatedmax
Did you mean to put + and not - on the offsets? 17x10+25 will hit the coil, but with that much negative offset you should have a lot of clearance.
You're going to have to get REAL aggressive with that pull and camber to fit those on stock body. I go with the -12's on the rear, unless you change you mind and run overfenders, then I'd go -25.
|
17X10+25 will NOT hit your coilover, unless you have some large stock spring coilover that i have never seen, im just kidding, i supose some coilovers have larger body's than others, but a friend of mine has 17X10+25's and he had no trouble with clearance. But -25 would be rediculious, ive seen a 18X12+0 in the rear witch would be close to the same as what you are thinking about and in the front was 18X10+5
P.s. S14FBS your car is Nice