|
Again if you have z33/g35 brakes brembo or standard calipers it will line up and fit as long as you enlarge the knuckle holes to accept the bigger bolts for the calipers.
The rear z33/g35 brembo and standard calipers do not fit. You can source sti rear brembo calipers for that mating it along w/ a z32 rear drum assembly and z32 rear rotor.
The rear brembos from the Skyline GTR Vspecs will also bolt on if you have the z32 rear brake conversion done. Not too sure about what rear rotor needs to be used but the caliper will bolt up.
As for the G37S/370z Akebono caliper setup, its super BIG. You will deff need 18" rims with BIG brake clearance or 19s. The front Akebono calipers dwarf the 350z/G35 front brembo calipers. Last time I saw a picture, the rear Akebono from 370z/G37 are as large as the front brembo calipers off the 350z/G35.
The rear would be a cool upgrade if you could source the rear caliper bracket adapters to enable you to use a larger rear rotor/caliper setup if you currently run a z32 rear brake setup
|