Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

JasonNagra · 01-30-2004, 01:24 PM

My raditator has been giving me a few issues lately and I was thinking of maybe stepping up to a Koyo unit. I plan on keeping my KA untill it dies on me (prolly not for a long time) but I'm sure one day I will go SR, most likely S13 SR. I was wondering is it possible to make the Koyo KA radiator work with the SR S13 motor? Is it a lot of work, or fairly straight forward? I've been looking at a lot of pics and the SR radiator outlet holes seem to be on the opposite side of the KA, but I was thinking since the SR does sit further back, it would be easy to run a hose or pipe across the radiator but I could be wrong. Just lookin for some ideas. Thanks, Jason.

01-30-2004, 01:24 PM	#1
JasonNagra Zilvia FREAK! Join Date: Aug 2002 Location: Long Beach Posts: 1,349 Trader Rating: (0)	KA Koyo work with SR? My raditator has been giving me a few issues lately and I was thinking of maybe stepping up to a Koyo unit. I plan on keeping my KA untill it dies on me (prolly not for a long time) but I'm sure one day I will go SR, most likely S13 SR. I was wondering is it possible to make the Koyo KA radiator work with the SR S13 motor? Is it a lot of work, or fairly straight forward? I've been looking at a lot of pics and the SR radiator outlet holes seem to be on the opposite side of the KA, but I was thinking since the SR does sit further back, it would be easy to run a hose or pipe across the radiator but I could be wrong. Just lookin for some ideas. Thanks, Jason. __________________ http://www.imagestation.com/picture/...f/f9dc7664.jpg Edit: check your link.