View Single Post
Old 04-14-2011, 04:48 PM   #12
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Send a message via AIM to fliprayzin240sx
If the Apex'i ones has the same body/outter design as the MRs, I doubt you'd fit 17x10 +18 up front if its slammed. I had MRs and I had to slap 8mm spacers to clear the front strut, while slammed to the ground on 17x10 +12. The inner lip of the rim was basically touching the spring. If you raise the car up where the spring and collar are above the rim, then you might clear.

But at the same time, I'm running Topline Aragostas out here and I have no issue clearing 18x10 +18 up front. Design is alot skinnier than the MRs.

My old Kouki with MRs and 17x10 +12 FNs with 8mm spacers up front with 235/40R17:


Topline Aragostas with 18x10 +18 Equips, 225/40R18s:
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote