[bb4_96]

Originally Posted by theboy

your cables are way too small. For something like this, over kill is barely enough. 0 gauge will work just fine. Just make sure its fine strand, vs heavy duty powerline cable. The rite way to relocate would be to run your possitive from your battery to your starter, run the oem positives to the same place on the starter (all 3 of them). Then run your battery negative all the way back to the front where it grounds to the intake manifold. Then from there ground it to the chassis as well. You can over kill the grounds but make sure every one that touches the motor or chassis is touching bare metal. Then bolt it down and paint over it to seal the metal again. What youve done is going to cause a fire. Thats too much for little wire.

if you're wiring a boat.