|
there is only one way this will work...
-Remove the digital speedometer out of the cluster
-take your digital harness, and your analog harness, and match the pins for the 12-pin digital speedometer harness, so it will get power, signal, and ground, lights, etc etc. splice the wires together, so that you will send speed signal to the digital speedo, and the analog speedo. the digital speedo sends the signal to the hud, not the ecu/speed sensor.
-set the digital speedometer unit in the dash next to the analog cluster, with the HUD still hooked up to it.
-install your analog cluster.
its most definitely going to be a tight fit back there, but if you MUST have a HUD with your analog cluster, thats the only way its going to work.
just goes to show the people who talk trash, need to be able to back it up.. not just say "Search noob"
__________________
|