Quote:
Originally Posted by nativG20
I hope this is the right place to post this.
I have a pair of 18x8 +42 inch Racing Harts C2s that i would like to get new outter lips for. the lips are 40 hole lip. Effectivly i want a 9.5 or 10 wide wheel.
Here is a Picture to try and illustrate what size lips i have
Im pretty sure the lips i have now are only 1 inch lips given you are supposed to measure the width of a rim from bead to bead, so the curved edge seen in the pic above shouldnt be measured (please correct me if im wrong)
Again my Wheels are 18x8 +42 as of current
Here are my Calculations (provided i do have a 1 inch lip) If i add a 3 inch lip to my existing face and barrels i will be adding (-24) offset to the wheel which would make my wheels 18x10 +18.
(please correct me if i am wrong)
and 10 wide may be too wide so i was thinking just adding a Lip that is just 1.5 wider or a total of 2.5 wide which would give me 18x9.5 +25. |
It'd be 18x9.5 +22, not 25.