Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

rcdad123 · 02-06-2012, 12:09 AM

^^^ make sure the flywheel is flat against the crank shaft, inspect by removing flywheel off and check the mounting surface to the crankshaft. make sure both crank and flywheel are clean and flat. use blue loctite on the flywheel bolts.

02-06-2012, 12:09 AM	#5
rcdad123 Zilvia Addict Join Date: Jul 2011 Location: san diego Posts: 639 Trader Rating: (0)	^^^ make sure the flywheel is flat against the crank shaft, inspect by removing flywheel off and check the mounting surface to the crankshaft. make sure both crank and flywheel are clean and flat. use blue loctite on the flywheel bolts.