Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Ghst 01 · 05-20-2004, 09:13 PM

Well in the process of removing the oil pan in order to have the oil return line welded for the turbo i ran into this problem... the damn nut on the passenger side motor mount is on so tight that is starting to strip... i cant even break it with a breaker bar.... i sprayed hella WD-40 and still no use.... Any ideas?????

05-20-2004, 09:13 PM	#1
Ghst 01 Zilvia Junkie Join Date: Dec 2003 Location: San Francisco, CA Age: 46 Posts: 479 Trader Rating: (0)	Motor mount nut stripping Well in the process of removing the oil pan in order to have the oil return line welded for the turbo i ran into this problem... the damn nut on the passenger side motor mount is on so tight that is starting to strip... i cant even break it with a breaker bar.... i sprayed hella WD-40 and still no use.... Any ideas????? __________________ AIM: ghst01 http://www.cardomain.com/ride/585615 http://www.myspace.com/8407376 96 red zenki: Greddy KA Turbo kit (TD06-20g, 370cc, Emanage, Vspell FMIC), TEIN HE's, VIS Vader CF hood, Falken Azenis ST-115's, Sony Xplod head unit. Last edited by Ghst 01; 05-20-2004 at 09:42 PM..