ok finnallly for a small update before she is finished.
so we came to the conclusion that the stock tach will not work the can bus system is going to be too hard to by pass.
but for some reason the speedo works not sure why or how accurate it is.
so im pretty positive i am going to pull all the gauges and run after market ones which i am not familiar with trying to get them to work any suggestions or opinions or part numbers are welcome.
i ran the car for about thirty seconds and seems to be ok idle is kinda high but i figured it would be considering new iac new computer etc. it will prolly have to learn a little bit.
but today i am buttoning up the whole system and hopefully driving it home.
also i popped it in first gear while on the jack stands and under any sort of throttle it kicks out of gear i think the detents might be bad. i want to try it again with it filled with fluid and see what happens .
but where is my update
utilized the stock z pedal
ran the line up through the firewall
headers were wrapped to prevent heat soak
ypipe that was made
upper radiator hose
enjoy ill be putting it all together today hopefully drving it home tonight